Oxygen & nitrogen generation systems · ISO 9001 & ISO 13485 registered

PCI Gases Search
Menu

Home » Oxygen Solutions » Industrial Oxygen Industries » Oxy-Fuel Cutting in Metal Fabrication

Oxygen Technology Markets

On-Site Oxygen for Oxy-Fuel Cutting in Metal Fabrication

Cutting torch throwing sparks as it cuts through a steel plate

Metal fabrication & scrap

Cut oxygen costs by generating it on site

Operating costs can be significantly reduced by generating oxygen on-site as opposed to buying and having oxygen delivered

Oxygen plays a very important role in the scrap industry: it is used with oxy-fuel cutting to break down metal pieces of scrap before recycling. The Deployable Oxygen Concentrator System (DOCS) can be directly connected to a cutting torch to be used instantly. If the mode of cylinder oxygen is preferred, then the DOCS unit is capable of filling up cylinders at 2,000-2,650 psig (138 – 183 barg) of fill pressure.

Compare oxy-fuel cutting oxygen generator models
Operator watching a CNC cutting machine
PCI DOCS oxygen generators installed in a plant room

How it works

How a PCI DOCS oxygen generator for cutting works

Based on existing technology used in its military medical oxygen generators, PCI developed a commercial line of on-site oxygen generators:

The DOCS advantages

Best total cost of ownership (TCO) in its class

Easy installation

Lower maintenance cost

Reliable source of oxygen

View all PCI oxygen generator products

Single-bed VSA technology

PCI Gases manufactures Deployable Oxygen Concentration Systems (DOCS), utilising a single bed state of the art VSA technology. This system is one of the most reliable, robust and cost-effective sources of on-site oxygen generation systems available.

One blower, lower costs

Utilising a single blower to both supply air to the VSA as well as remove the nitrogen and other contaminant gases from the VSA bed reduces both capital costs as well as operational costs when compared to a PSA of comparable capacity.

Load following saves energy

PCI’s Load Following feature saves energy by slowing down the VSA blower motor during periods of reduced flow.

Technology

VSA vs. PSA oxygen generators for metal cutting

To produce oxygen from air, PCI uses a proprietary Vacuum Swing Adsorption (VSA) process that maximizes sieve and power efficiencies. Such efficiencies translate into low operating costs for oxygen generation.

A VSA will save approximately 50 percent of the energy consumption over a PSA of equivalent size and delivered pressure. A VSA also eliminates 33 percent of the main components and 70 percent of the process valves, which increases its reliability and significantly reduces its maintenance costs.

Power (kWh/m³)

PSA

1.3 – 1.5

PCI VSA

0.65

Main components

PSA

6

PCI VSA

4

Process valves

PSA

10

PCI VSA

3

12 benefits of PCI DOCS oxygen generators

Factory Tested and Certified

Easy Installation (Hours not Days)

Uses Half the Power of Traditional PSA’s

No Air Compressor and Dryer Required

Oil-Free Design and Integrated Safety Features

Energy Saving Load Following Capabilities

Single Bed VSA Minimizes Process Valves and Manifolds

Remote Monitoring and Diagnostics Capabilities

Modular Design Offering Flexibility

Simple Operation and Easy to Maintain

Minimal Space Requirement

Minimal Civil Construction Work Necessary

All of these features reduce the cost of preventative maintenance and repairs, thereby reducing the operating cost.

Lower your cost of oxygen

Generate your own oxygen on site

Why pay an Industrial Gas company to supply your oxygen requirements when you can generate your own Oxygen? With a PCI Gases DOCS onsite Oxygen Generating System you can save money and…

Eliminate high cost purchased gases

Eliminate long term contracts

Eliminate ongoing price increases

Eliminate rental and handling charges

Eliminate delivery & fuel sur-charges

Fairbanks, USA

Metal cutting oxygen installation in Fairbanks

PCI Gases System

DOCS 200

Application

Oxygen for metal sheet cutting

Oxy-fuel cutting torch cutting steel plate Row of oxy-fuel cutting torches on a gantry

Models

Oxygen generator models for oxy-fuel cutting

Suitable oxygen generator models

Model

Output flow rate

Output pressure

Purity

DOCS 80

80 lpm

5 - 100 psig

93% +/- 3%

DOCS 200

200 lpm

5 - 100 psig

93% +/- 3%

DOCS 500

500 lpm

5 - 100 psig

93% +/- 3%

DOCS 5000

5000 lpm

5 - 100 psig

93% +/- 3%

Scroll and Explore →

FAQ

Oxy-fuel cutting oxygen questions

How long does installation take?

Our oxygen generators are built to be light weight, compact, and basically turn-key. The installation time is measured in hours and not days, which is the case for other systems.

Can the oxygen generator be monitored remotely?

The oxygen concentrator control system includes the ability to remotely monitor critical system functions. All start/stop/alarm/monitoring can be performed from any computer once access to the internet has been established. This feature also provides the customer or PCI the ability to log-on and monitor system performance or troubleshoot operational issues.

Talk to PCI Gases

Ready to Reshape Your Tomorrow?

12201 Magnolia Avenue, Riverside, California 92503, US · +1 951.479.0860 · ox****@******es.com
PCI Gases is an ISO9001 & ISO13485 registered company

Skip to content